KW Variant 2
KW V2 Coilovers
Sportiness, more body control with more ride comfort and outstanding looks.
With adjustable rebound stage damping.
Customized suspension lowering
Rebound
Composite spring seat
Trapezoidal thread
INOX-LINE
7-post drive dynamics test stand
Technical component report
Rebound stage
The KW V2 coilover kit is the suspension kit for the accomplished sports driver who wants a customized vehicle lowering with the ability to make adjustments in setup. The individually adjustable rebound stage damping ensures a better connection on fast road sections and an easier vehicle control. The driving comfort on poor road surfaces can significantly be influenced with a customized rebound stage damping.
Setup – factory-set pre-configured damper setup with adjustable rebound damping
With the KW V2 coilovers, you as an accomplished sports driver can take influence on the handling and comfort with the rebound damping (“TVR-A”-technology) that is adjustable in 16 clicks. This allows you to set the KW dampers tighter or more comfortable, without affecting the bottom valve of the compression stage.
Rebound damping on the front axle
Rebound damping on the rear axle
TVR-A rebound damping::
The two-stage patented “TVR-A” technology enables the low volume flows to flow through an adjustable conical low-speed bypass at slow damper speeds and to open the main rebound valve for the large volume flows at higher piston speeds. This results in a significant increase in driving comfort without affecting the high speed in the safety-relevant area. 16 exact clicks are available for the individual setting, so that a decision can be made between more comfort or more body control.
Continuously lowering
The KW V2 coilover kit allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after the years.
The benchmark for coilovers
As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit.
Vehicle-specific basic damper tuning
Assembly of the rebound valve
KW struts are made of stainless steel
After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW V2 coilovers, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.
Our experiences for your driving pleasure
For more than 20 years, we as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”.
Vehicle-specific chassis development
Production directly in-house at KW in Fichtenberg
Every KW coilover kit is subjected to extensive load tests
Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in our company headquarters in Fichtenberg in order to meet the high standards of our KW quality management. So for us as a German manufacturer, it is important that we guarantee a several-year warranty on our KW coilover kits, which exceed the original equipment manufacturer quality, as well as suspension solutions which include more than 4,600 applications.